Guida per costume Soldato/Ufficiale COBRA

Post Reply
User avatar
Comandante COBRA
Specialist
Specialist
Posts: 407
Joined: 26/01/2012, 19:37
Location: Springfield

Guida per costume Soldato/Ufficiale COBRA

Post by Comandante COBRA » 18/02/2012, 11:45

Ho notato alcune istruzioni su come realizzare l'uniforme del soldato Cobra, nel sito di un gruppo affiliato a Cobra's Finest. Allego l'immagine di un ufficiale Cobra e i links ove fornisce informazioni su come e dove acquistare il necessario per realizzare tali soggetti.

Image

Uniform / Weapons Requirements
http://cobra3rdnightwatch.com/?page_id=43

Greetings! By now, you will have realized that there’s not much to construct on the uniform. The only thing that needs to be put together is the uniform coat. Bear in mind, I don’t sew, so some of the terminology could be wrong here. The goal is to have your coat ready to go, with a panel on the front that is attached on the left hand side of the coat and fastens on the right hand side of the coat (as you are wearing it). Here’s how you do it -

What you will need -

Two navy blue BDU tops (see the uniform requirements page).

Snap strip (approx 4 feet or so)

Step 1 – Deconstruct the back portion of the larger of the two BDU coats.

Step 2 – Sew the edges of that panel into seams on the two sides and the bottom (NOT THE TOP), so that the edges aren’t all frayed and sad.

Step 3 – Line up the panel on your BDU coat. Make sure that the panel is lined up all the way to the left seam of the BDU coat, and that the top lines up with the collar-bone seams on both sides. The panel SHOULD cover up the pockets on the right side of the BDU coat. On the panel, mark out a slight ‘V’ for the neck area.

Step 4 – On the panel, cut the ‘V’ for the neck and sew the top seam shut.

Step 5 – Attach one side of the snap strip to the right side of the panel.

Step 6 – Sew the panel as close as you can to the left seam of the BDU coat, all the way up to the shoulder seam, and along the collar-bone seam to the collar.

Step 7 – Sew the snap strip to the right side of the BDU coat. CAUTION – Make sure that the snaps line up with your panel, or else your panel will be off and look all sad.

Volendo si potrebbe acquistare l'intera uniforme direttamente da Pit Viper Studios... ma siete avvisati: è un tantino costosa

User avatar
Neapolitan Joe
Colonel
Colonel
Posts: 4442
Joined: 18/09/2009, 1:07

Soldato/Ufficiale COBRA.

Post by Neapolitan Joe » 18/02/2012, 13:09

Interessante!
:grazie:

User avatar
AlexEyes
Colonel
Colonel
Posts: 3104
Joined: 18/09/2009, 1:25
Location: Unknown
Contact:

Re: Guida per costume Soldato/Ufficiale COBRA

Post by AlexEyes » 18/02/2012, 13:27

Ottime Info grazie MIlle!!! :grazie:
Image
Image

User avatar
Comandante COBRA
Specialist
Specialist
Posts: 407
Joined: 26/01/2012, 19:37
Location: Springfield

Re: Guida per costume Soldato/Ufficiale COBRA

Post by Comandante COBRA » 10/03/2012, 12:45

Un tizio cinese ha realizzato l'uniforme del soldato cobra. Gli accessori sono penosi (ginocchiere, etc), ma l'uniforme potrebbe essere una soluzione accettabile... bisogna vedere quanto chiederebbe solo per l'uniforme.

http://cgi.ebay.it/Cobra-Commander-Cosp ... 0693585913

Post Reply